View Cart
0 Items. Total: $0.00
Home Contact Us
     
 
Buy Swivel Joints - Style 80 Online
D2806DLA6A6SN
6” D2000 Style 80 Aluminum Swivel Joint with Standard Bearings. Grease Type: Standard - Dura-Lith Inlet Connection: Aluminum 300# Flange Outlet Connection: Aluminum 300# Flange No Seals.
 
     
     
   
     
   
 

IMPORTANT INFORMATION ABOUT ALDON® HINGED DERAILS

Derails are emergency car stopping devices to prevent unauthorized movement of a locomotive or railcar. the derail lifts the flange of the car wheel and drops it clear of the rail. Simultaneously, the wheel opposite the derail is guided off the rail. Once the car wheel leaves the rail, forward movement is greatly impeded.
Mandatory Use Regulations:
 
FRA Subpart E - Derails

Derail Minimum Requirements
OSHA 1910.261(c)
Pulp and paper cars
OSHA 1910.176(f)
All freight cars

DOT Pamphlet #34

Safe loading/unloading of tank cars

FRA Chapter 11, #218.25
Workmen on track
Effective derailing depends on:
  • Proper derail size and installation
  • Normal switching speed travel
  • Flat track -- no grades.
    Fully exposed track -- derailed wheels need to sink into the ties and ballast.
  • Ample room for derailment. A derailed car may travel a car length or more before stopping, depending on speed.
  • Installation in sound track.
  • In curved track, install on outside rail.
Hinged Derails must be configured for your rail.  Use our Configuration Wizard to Configure Your Hinged Derail to Your Rail.
 
   
     
 

Model:  4014-02 Hinged Derails

DR-1 One Way Right Throw One-Way Hinged FOR FREIGHT CARS and LOCOMOTIVES For rails 60 lbs. and heavier. Derails are sized to fit a specific rail height, including thickness of tie plate. Weight 156 lbs.
Price: $1,228.00 Each

 
View Cart
 
     
     
 
Similar Items
4014-01
DR-1 One Way Left Throw One-Way Hinged FOR FREIGHT CARS and LOCOMOTIVES For rails 60 lbs. and heavier. Derails are sized to fit a specific rail height, including thickness of tie plate. Weight 156 lbs
 
     
     
 
Similar Items
4014-03
DR-2 Two Way Derail FOR FREIGHT CARS & ROAD-RAIL VEHICLES. Blue derail sign and holder are included with the derail. Six screw spikes are provided for proper anchoring to ties. Height of derail above rail: 3" Weight 165lbs