|
|
|
|
|
|
|
|
|
|
Buy
Swivel Joints - Style 10
Online
D2106SLS3S3SV
6” D2000 Style 10 Stainless Steel Swivel Joint with Standard Bearings.
Grease Type: Standard - Dura-Lith
Inlet Connection: Stainless Steel FNPT
Outlet Connection: Stainless Steel FNPT
Viton Seals.
|
|
|
|
|
|
|
|
|
|
|
|
|
Tags of Most Popular Categories
|
|
|
|
|
|
|
| | | | | |
Crane Stops
Cushion-Slide Crane Stops
Cushioned crane stops are for temporary isolation of overhead cranes. Such isolation is necessary when one crane is undergoing maintenance with active cranes on the same runway or personnel are working on or near the crane runway.
Non-Slide Crane Stops
Recommended wherever below rail head clearance is minimal and where a non-sliding crane stop is needed. Wedge dogs lock wedge to rail head and do not interfere with hook bolts. On impact, stops slide only marginally or not at all. Do not use at end of crane run.
| | | | | |
|
|
|
|
|
|
|
Model:
4016-21
Crane Stops
|
|
Non-Slide Bumper Crane Stop
Wedge stands 15 inches above top of rail. Underside of crane bumper should not be more than 12" above top of rail. Specify rail size and section.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Similar Items
4016-07
Cushion Slide Wheel Crane Stops
Wedges made to fit a specific wheel diameter. Wedges meet OSHA regulation that half the wheel diameter is covered. Cinch plates are made for a specific rail size and section.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Similar Items
4016-08
Cushion-Slide Bumper Contact Crane Stop
Wedge stands 15” above top of rail. All standard crane bumper heights can be accommodated.
Cinch plates are made to fit a specific rail size and section.
|
|
|
|
|
|
|
|
|
|
|
|